Autowatch Ghost Installers Midlands
As car theft in Stourbridge is increasing and more people are looking for solutions for security that go beyond their precious possessions. The Autowatch Ghost is one such solution.
This immobiliser for the CAN bus will guard your vehicle from hacking or key cloning and even ECU swapping. It utilizes the original buttons of the vehicle to generate an individual PIN sequence that needs to be entered to allow the car to begin.
Easy to install
The Autowatch Ghost is a discreet next generation immobiliser that connects to your vehicles CAN data network and does not require any additional wiring. It comes with an exclusive PIN sequence that is created by our team and entered via buttons on your dashboard. The device is small enough to fit in the harness of your vehicle which makes it difficult for thieves to locate. It is also weatherproof and can be hidden in the most unlikely locations of your vehicle.
Once installed, the Ghost immobiliser cannot be detected by modern thieves that use diagnostics to detect circuit cuts. The device does not transmit radio frequency signals that can be detected using code-grabbing or RF scanning technologies so even if your vehicle is cloned or stolen it will not prevent the engine from starting.
It can be fitted to the majority of new vehicles. It's also a great option for classics as well as sports and luxury models that require storing their batteries in an isolated environment. The system comes with a service mode that allows you to temporarily remove your PIN code which means that a garage will be able to work on your vehicle without knowing your code. The Autowatch Ghost 2 also comes with a tamper proof alarm and QR Fingerprint stickers that are registered to your vehicle, so that when your car is taken down for parts, it can be traced back to you.
Autowatch Ghost 2 is a TASSA Verified product that is recognised by insurance companies. This could reduce your insurance premiums. TASSA is a symbol of confidence for the security industry that the product has been independently tested and verified as operating according how to become a ghost immobiliser installer its specifications. Many insurance companies reward customers with an TASSA-certified security system for their vehicle.
Autowatch is a top brand in the field of vehicle security and has been operating for more than 20 years. With this knowledge and experience Autowatch offers a great range of products that can be installed by their authorized network of installers. You can be assured that a licensed installer will install the product in a safe and correct manner in accordance with manufacturer guidelines and specifications.
No extra wiring
The Ghost is a discreet next-generation immobiliser that guards your vehicle against key theft and cloning. It connects to your vehicle's CAN Data and requires a user defined PIN code to disable your engine. The PIN code is entered by pressing the buttons on the dashboard and the steering wheel in a certain order. The device is completely undetectable and weatherproof.
Everyday more vehicles are stolen, but without owners keys. The thieves are able to copy equipment and door lock pick sets that allow them to steal cars in seconds. Make sure your car is safe from theft with a ghost-immobiliser by Autowatch Birmingham.
The Ghost isn't connected to your key fobs so it is not able to be disabled by cutting any wiring. It is a small, weatherproof device that can be concealed within your vehicle's wiring loom. This makes it virtually unnoticeable to thieves.
The Ghost is an TASSA Verified System which means that it can be acknowledged by insurance companies and could possibly lower your cost of insurance. It is also connected to the international security register and is easily identified by QR finger print stickers placed on your vehicle.
Simple change of PIN code
It's simple and fast to change the PIN code of your Ghost. You can do this at any time by using the Autowatch ghost alarm installation application on your iPhone. Follow the steps to create your new PIN code. Make sure that your phone is Bluetooth connected to your vehicle. You can then just enter your button disarm sequence and start the vehicle. It is important to note that if you change your PIN code then you will need to pair your Ghost with the app again.
The Autowatch ford focus ghost installer is an ultra-discreet device that connects directly to your vehicle's CAN data network. It is equipped with an unique code that we set up together with you during the installation and fitting. It is weatherproof and operates quietly using the buttons on your dashboard / steering wheel. It doesn't make use of signals from radio frequencies or LED indicators, making it impossible for thieves to track employing sophisticated codes and RF scanners to detect security systems that are not from the aftermarket.
Insurance companies now accept it as TASSA-approved and can reduce your premiums. It is safe from key cloning and hacking, as well as ECU swapping to shut down your vehicle's engine. The QR codes are hidden inside the bodywork, trim panels and other parts of the vehicle. This permits the owner of the vehicle to be identified even if it is stolen.
The GHOST-II comes with a unique QR finger print sticker which is linked to the international secure register. This means that even if it is taken away and offered for sale on the black market, it cannot be used in a new car because it has been registered with the secure register.
It also protects against a new type of theft, referred to as relay attack. It is when thieves take the car they are looking for, and then use a device to take control of the vehicle remotely, by spoofing the in-built security system. The GHOST II guards against this, by blocking data transmission between the built-in security system and the remote controller.
Weatherproof small device
A small, weatherproof device is hidden in the wiring loom of your vehicle and, once hidden, it is impossible for thieves to recognize. It's designed to be as small as possible without compromising functionality and is easily mounted by our professional installers. The Autowatch Ghost II Immobiliser utilizes the onboard CAN data network to communicate with your vehicle's ECU to lock it. This means it's completely silent & cannot be detected by thieves looking for the distinctive click of a traditional relay type immobiliser. It also stops key cloning & ECU swapping, which is often used to steal modern vehicles.
The Autowatch Ghost immobiliser is a top-of-the-line system that offers high-security and protection against key cloning, key theft and car hacking. It's TASSA certified, which is recognized by insurance companies and may reduce your cost of insurance. It works by blocking engine start with a user-defined PIN code entered through buttons on the dashboard or the steering wheel. The pin can have up to 20 press for extra security. If you do not remember the code or a button fails it, you can enter an emergency PIN which will disable the system.
Modern cars and the use of keyless entry and contactless key systems has made it easy for criminals to steal the keys to your car and access your vehicle. The Autowatch ghost tracker installation immobiliser is the perfect solution to this problem. It's designed to be as small as it is discreet and utilizes the vehicle's existing buttons. It's easy to install and does not require wiring as it connects to the onboard ECU directly via CAN data networks.
It is a CAN technology, which means there is no need for complex circuitry. The immobiliser is able to be modified to fit the majority of vehicles that are available without the use of additional components. The CAN data network also has the advantage that it isn't susceptible to radio frequency scanning or code-grabbing techniques employed by criminals.
As car theft in Stourbridge is increasing and more people are looking for solutions for security that go beyond their precious possessions. The Autowatch Ghost is one such solution.
This immobiliser for the CAN bus will guard your vehicle from hacking or key cloning and even ECU swapping. It utilizes the original buttons of the vehicle to generate an individual PIN sequence that needs to be entered to allow the car to begin.
Easy to install
The Autowatch Ghost is a discreet next generation immobiliser that connects to your vehicles CAN data network and does not require any additional wiring. It comes with an exclusive PIN sequence that is created by our team and entered via buttons on your dashboard. The device is small enough to fit in the harness of your vehicle which makes it difficult for thieves to locate. It is also weatherproof and can be hidden in the most unlikely locations of your vehicle.
Once installed, the Ghost immobiliser cannot be detected by modern thieves that use diagnostics to detect circuit cuts. The device does not transmit radio frequency signals that can be detected using code-grabbing or RF scanning technologies so even if your vehicle is cloned or stolen it will not prevent the engine from starting.
It can be fitted to the majority of new vehicles. It's also a great option for classics as well as sports and luxury models that require storing their batteries in an isolated environment. The system comes with a service mode that allows you to temporarily remove your PIN code which means that a garage will be able to work on your vehicle without knowing your code. The Autowatch Ghost 2 also comes with a tamper proof alarm and QR Fingerprint stickers that are registered to your vehicle, so that when your car is taken down for parts, it can be traced back to you.
Autowatch Ghost 2 is a TASSA Verified product that is recognised by insurance companies. This could reduce your insurance premiums. TASSA is a symbol of confidence for the security industry that the product has been independently tested and verified as operating according how to become a ghost immobiliser installer its specifications. Many insurance companies reward customers with an TASSA-certified security system for their vehicle.
Autowatch is a top brand in the field of vehicle security and has been operating for more than 20 years. With this knowledge and experience Autowatch offers a great range of products that can be installed by their authorized network of installers. You can be assured that a licensed installer will install the product in a safe and correct manner in accordance with manufacturer guidelines and specifications.
No extra wiring
The Ghost is a discreet next-generation immobiliser that guards your vehicle against key theft and cloning. It connects to your vehicle's CAN Data and requires a user defined PIN code to disable your engine. The PIN code is entered by pressing the buttons on the dashboard and the steering wheel in a certain order. The device is completely undetectable and weatherproof.
Everyday more vehicles are stolen, but without owners keys. The thieves are able to copy equipment and door lock pick sets that allow them to steal cars in seconds. Make sure your car is safe from theft with a ghost-immobiliser by Autowatch Birmingham.
The Ghost isn't connected to your key fobs so it is not able to be disabled by cutting any wiring. It is a small, weatherproof device that can be concealed within your vehicle's wiring loom. This makes it virtually unnoticeable to thieves.
The Ghost is an TASSA Verified System which means that it can be acknowledged by insurance companies and could possibly lower your cost of insurance. It is also connected to the international security register and is easily identified by QR finger print stickers placed on your vehicle.
Simple change of PIN code
It's simple and fast to change the PIN code of your Ghost. You can do this at any time by using the Autowatch ghost alarm installation application on your iPhone. Follow the steps to create your new PIN code. Make sure that your phone is Bluetooth connected to your vehicle. You can then just enter your button disarm sequence and start the vehicle. It is important to note that if you change your PIN code then you will need to pair your Ghost with the app again.
The Autowatch ford focus ghost installer is an ultra-discreet device that connects directly to your vehicle's CAN data network. It is equipped with an unique code that we set up together with you during the installation and fitting. It is weatherproof and operates quietly using the buttons on your dashboard / steering wheel. It doesn't make use of signals from radio frequencies or LED indicators, making it impossible for thieves to track employing sophisticated codes and RF scanners to detect security systems that are not from the aftermarket.
Insurance companies now accept it as TASSA-approved and can reduce your premiums. It is safe from key cloning and hacking, as well as ECU swapping to shut down your vehicle's engine. The QR codes are hidden inside the bodywork, trim panels and other parts of the vehicle. This permits the owner of the vehicle to be identified even if it is stolen.
The GHOST-II comes with a unique QR finger print sticker which is linked to the international secure register. This means that even if it is taken away and offered for sale on the black market, it cannot be used in a new car because it has been registered with the secure register.
It also protects against a new type of theft, referred to as relay attack. It is when thieves take the car they are looking for, and then use a device to take control of the vehicle remotely, by spoofing the in-built security system. The GHOST II guards against this, by blocking data transmission between the built-in security system and the remote controller.
Weatherproof small device
A small, weatherproof device is hidden in the wiring loom of your vehicle and, once hidden, it is impossible for thieves to recognize. It's designed to be as small as possible without compromising functionality and is easily mounted by our professional installers. The Autowatch Ghost II Immobiliser utilizes the onboard CAN data network to communicate with your vehicle's ECU to lock it. This means it's completely silent & cannot be detected by thieves looking for the distinctive click of a traditional relay type immobiliser. It also stops key cloning & ECU swapping, which is often used to steal modern vehicles.
The Autowatch Ghost immobiliser is a top-of-the-line system that offers high-security and protection against key cloning, key theft and car hacking. It's TASSA certified, which is recognized by insurance companies and may reduce your cost of insurance. It works by blocking engine start with a user-defined PIN code entered through buttons on the dashboard or the steering wheel. The pin can have up to 20 press for extra security. If you do not remember the code or a button fails it, you can enter an emergency PIN which will disable the system.
Modern cars and the use of keyless entry and contactless key systems has made it easy for criminals to steal the keys to your car and access your vehicle. The Autowatch ghost tracker installation immobiliser is the perfect solution to this problem. It's designed to be as small as it is discreet and utilizes the vehicle's existing buttons. It's easy to install and does not require wiring as it connects to the onboard ECU directly via CAN data networks.
It is a CAN technology, which means there is no need for complex circuitry. The immobiliser is able to be modified to fit the majority of vehicles that are available without the use of additional components. The CAN data network also has the advantage that it isn't susceptible to radio frequency scanning or code-grabbing techniques employed by criminals.
댓글 달기