Replacement UPVC Door Handles

You can find the ideal handle for your door handle replacements, whether you're replacing your existing handles or adding security. These upvc handles are easy to install and meet the required 92mm centres of multipoint locks.

The backplate fixing centre and the lever/keyhole dimensions are the most important measurements. Compare these measurements with your existing marks carefully before placing an order.

Lever/Pad

Lever pad door handles consist of an elongated lever handle on one side and a paddle-shaped handle on the other. These are designed for use with key wind locks. However, they can be fitted to multipoint split spindle door locks.

After you have picked the correct handle for the doors, the finishes will be displayed in the drop-down menu. Some styles of handles are not available in all finishes. You should always check the technical drawing and dimensions for the item you are looking to ensure that you receive the right fit and size.

It is essential to ensure that when you choose a new set of Upvc lever pad handles, they match the PZ (distance from the handle spindle to the centre of the hole of the cylinder) of your multipoint door locks. This is because they must be lined up for the doors to stay locked, no matter if you're looking at them from the inside or from the outside. Our handles are designed to fit the majority of standard cylinders, however it is important to double-check prior to purchasing.

If you are looking to upgrade to dual spindle levers, you'll need to remove the handles that are currently in use and then disassemble the lock case. This will require an additional split inline cylinder. These can be bought separately and we have an entire technical diagram that you can take a look at in the pictures for each product.

After you have removed the screws holding the handle on your door, it is recommended to loosen them and examine the mechanism to see how it's performing. If the screws are too tight then you might need to loosen them further. After that, you can take the spindle from the door handle and replace it with your new upvc handle. Before you screw the handle into the frame, it is recommended to check that it is in the proper position, and you can do this by putting your finger in the gap between the frame of the door and the door handle to ensure that it is level.

Lever/Lever

Lever external door handles euro lock handles are a multi point lock using a Euro cylinder and are found on the majority of upvc window locking handles double doors, Aluminium Door handle doors and a few wooden doors. They have a lever inside and an outside paddle and are generally available in two varieties. Sprung - these have a spring cassette fitted inside the backplate to move the handle lever to a horizontal position. Non-sprung: They do not include a mechanism that can spring the handle lever to a horizontal position.

To repair a sagging door handle lever it is necessary to locate the hole or pin that is the detent access point. It's typically a small hole or protruding ring, or rectangle, found on the handle base plate. Once you have located it, loosen the set screw using a screwdriver and remove it to release the lever and return it to its horizontal position.

Once the handle has been placed horizontally, you can reinstall the screws. Make sure to tighten them so that the handle remains firmly connected to the base plate. You may want to apply a threadlocking solution to the threads of the screw to improve grip and prevent them from loosing over time.

Lever door handles that droop can be caused by many factors. The most common cause is that the fixings aren't tight, causing the lever bearing to pull against the door. It could also be that the levers may not have been adjusted at the right angle, which compresses the latch mechanism and stops it from fully springing into operation.

Another common cause is that the lever that is sprung is not functioning properly and this is typically due to the spring not being in the proper position within the backplate. To check whether the handle is back to horizontal, simply move it.

If your door handles are loose it is important to identify the issue quickly, since this can lead to excessive wear on the screws and possibly to the handle falling off the base plate. It is recommended to tighten all loose screws on a regular basis, as this will help to stop them from loosening.

Lever/Snib

The handles for doors made of upvc are also known as 'Snib' handle sets and feature a snib button at the top of the lever that you can push down to lock your door if you don't use the fake lock. These handles are fitted with the Fullex lock 68PZ. (68mm between the spindle and the centre of the lock). We also carry a selection of other door handles with 68PZ from manufacturers such as Ferco and Fab & Fix.

Changing your door handle is a cost-effective method to upgrade your home, whether you're replacing existing handles or fitting new ones to doors you've built in your house. There are a variety of upvc door handle available with traditional levers on backplate, straight or curving short latches, and knob handles that resemble dummy knobs for multi point locks which are perfect for French doors.

Lever on backplate handles are usually rectangular in shape, however you can also find oval or circular versions that are referred to as rose door handles. These door handles are characterized by a lever or a knob that is mounted on a backplate. The backplate can be removed to allow for hidden fixing.

There are a wide range of coloured and chrome finishes for these handles to complement your door and other hardware, such as hinges, knobs and bolts. Some handles come with grub screws, which aid in the secure attachment of the lever or knob to the spindle. Other handles come with bathroom spindles that can be used to operate bathroom locks. They feature a thumbturn turn as well as a release mechanism, perfect for use on bathroom doors.

Mortise

If your uPVC front door handle is stuck in the open position, the problem is likely to be due to the tubular latch. There are a few factors that could cause this, one of which is the simple lack of lubrication on the latch plate. This can be corrected quickly by opening the door and spraying lubricant onto the handle and lock. Or, it could be that the latch plate has been dislodged from the backplate. This can be a bit more problematic and requires a professional to fix it.

A multipoint handle system is the ideal solution to stuck door handles. These handles are mounted on the door's faceplate and are operated by a thumb turn knob or key that triggers an electronic cam that locks the deadbolt. The handles come in different sizes to fit various types of uPVC door and in various attractive finishes that match the hardware that is currently in use. These handles can be purchased online or from a local locksmith. They are easy to install and come with clear directions.

To select a replacement handle set, you'll have to be aware of the PZ size of your cylinder. This is the distance from the edge of the inner door frame to the centre point of the hole for the handle in millimetres. You'll also need the type of lock for your door, whether it is a mortise or hook lock. The easiest way to find the correct handle after you have the measurements is to use the brand filter on the website. This will narrow down the options, and you will then choose the appropriate size from there.

A typical handle set comprises a handle unit comprising two screws of different lengths, drill guides and installation instructions. Smarter versions, such as the Igloohome Smart Mortise 2+ come with a mortice lock with keypad. These are more complicated devices that are suited to professionals or highly skilled DIYers. Some handle sets have various additional accessories, such as weather strips that can be used to enhance the appearance of the door.