How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique set of steps to take to add the second key. This requires the use of a handheld computer called Tech-2 that is operated by the dealer. Then the transponder must be replaced and a key are required to be purchased.

Change your keys regularly to prevent one from wearing out quicker than another. This will help keep your keys in pristine condition.

Replacement Case

In contrast to the traditional Saab keys of old keys, the latest key fobs have electronics inside that make it difficult to make a copy. This has made stealing cars much more difficult than twenty years ago. However, it also has made the replacement of lost keys a comparatively expensive endeavor.

Every owner of a Saab 9-3 should have at minimum two working keys. If one is lost, it costs a lot of money to replace it in the car since it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100 and $200 for this.

There are some ways around these costly. Some parts providers will use the code of the spare key to cut a new metal blade at a fraction what the dealer charges. The key must be the exact identical to the original one for it to function in your vehicle.

Follow these steps to replace the case. You'll need a flathead and patience. With the screwdriver slowly break the plastic and separate the emergency keys from the case. Once the case has been opened, remove all electronics and put them in your new case. Make sure you insert the correct key and badge back in the case too.

Replacement Battery

The Saab 9-3 replacement battery is a budget part that can be quickly and easily replaced. This YouTube tutorial for DIY Cyclone Cyd shows how to replace the remote key fob battery in just four steps. This guide should work with any modern saab spare key key fob, although the process might differ slightly.

The first step is to find the button that opens the backup key on the fob. This button is usually located on the back of the fob next to the Saab Logo. Use a flathead screwdriver to insert the screwdriver in the small hole on this button. This will allow you to open the fob's case to allow you to replace the battery.

Once the new CR1632 battery is installed, you can reassemble the remote key fob, and then program it to your car. The whole process should not take more than an hour. It is a simple procedure that doesn't require any special equipment.

The procedure is a little more complex if you lose your key, but it is possible. The dealer must first read the VIN of the vehicle before requesting a replacement TWICE module and key blade with the proper unique code. The dealer will then have to program the key using MDI, a brand new software tool.

Replacement Key Fob

The key fob is equipped with batteries that are used to lock and unlock your car. Batteries have a limited lifespan and eventually will die. This is a common problem that occurs with all vehicles and the good news is that you can change the batteries on most key fobs without having to replace the whole case. Amazon sells fobs for replacement that already have all the electronics installed. It is easy to remove the case and replace the batteries. You will need to remove the emergency key before you can replace the batteries. To do this, insert an small screwdriver with a flat head into the slot that is in the middle of the. The case will split when you turn the screwdriver around it.

When you are ready to replace the keys ensure you have a spare, as this will reduce the total cost by a substantial amount. If you have a spare you can ask the dealer cut an entirely new key and then program it to the car, which is cheaper than replacing the whole key fob.

It is possible to add another key to your car If you don't already have one, but it takes lots of research and effort. The cost for adding a second key is a few hundred dollars, and it also requires programming of the car's computer. This can be done by a professional, but it's an expensive option for most owners.

Replacement Ignition

As opposed to earlier Saab cars, the modern saab ignition key replacement 9-3 models use an advanced alarm system that is built on a key code. This means that in the event that you lose your only functioning key, getting another key can be extremely costly since the car needs to have a special computer module fitted and also must be specially programmed to accept an additional key. The majority of locksmiths aren't able to do this or even a dealer will charge several hundred dollars just to program the new key!

Dealers will charge you a high price to replace your car computer (also called the CIM or saab 9-3 key not accepted contact service - Dillon-winther.technetbloggers.De, twice) If you lose your sole working key. Instead we can reprogram the EEPROM in your current car computer to allow it to be programmed to accept a second key, saving you over 50% of what you'll spend at a dealer.

If you've been a faithful owner of an 03-11 SAAB 9-3, you likely have noticed that the ignition switch isn't the most durable. If the ignition key you have isn't functioning properly, you must consider replacing it. They can become very sticky and the buttons have been known to fall off. Fortunately, replacing the ignition key isn't as complicated as it sounds and can be done in a short time using the appropriate tools.