Why You Need a Ghost 2 Immobiliser Fitting Near Me
Modern day thieves can steal vehicles within 1 minute. They use the OBD port of the vehicle to hack into the ECU and then duplicate the key using an unprotected laptop inside the vehicle.
The Autowatch Ghost immobiliser can prevent this by sending pin codes to buttons on your vehicle (steering wheels and central console). It is completely undetectable to anyone inside your car.
No key fobs or LED indicators to reveal its location
If you're looking for a solution to stop keyless entry theft or key cloning, then look no further than the ghost immobiliser. This device is designed to guard your vehicle from these kinds of attacks by blocking the engine after a proper pin code has been entered. This is a great way to protect your car. Insurance companies for cars consider it a security feature that could lower the cost of a policy.
The way in which the ghost works is by connecting to your vehicle's CAN data network, once installed by us at Car Theft Solutions it will only start when you press the exact sequence of buttons using your personal override code. This means that any attempt to start the vehicle without entering this code will be greeted with a loud siren, and the engine will not start. The thief will then realize that they are being caught and will likely abandon the vehicle.
One of the major advantages of this system is that it doesn't transmit any signals like trackers, which means that thieves cannot use RF signal receivers to pinpoint the location of your Ghost unit. It also does not emit any IR (infrared) signals like the typical remote key fobs for control or trackers do, making it extremely difficult to deceive or hack.
The Ghost also has valet-mode which can be activated if you are transferring your vehicle over to an individual for parking or service. This will disable the CAN immobiliser for 30mph, and enables you to use the vehicle normally using your key fob or mobile app. The Ghost will function fully when the vehicle is back in its parking spot.
If you would like to know more about the ghost or have us install it in your vehicle, you can contact us at Car Theft Solutions today. We are a passionate family run business with over 10 years of experience in vehicle security including the Ghost immobiliser installation. We are a Thatcham approved installer of Ghost products and have built our reputation on customer satisfaction.
No cloning or hacking
The Autowatch ghost 2 immobiliser review is one of the most advanced immobilisers available on the market. It shields your vehicle from key cloning and hacking making it nearly impossible to take. The only method to steal your car is physically tow it away. Even then, they would not be able to start the engine.
This is due to the fact that unlike other immobilisers which only prevent the car from starting if they don't have your fob, this clever system actually disconnects your engine control unit so that the vehicle is unable to be started. The system transmits a message through buttons on the steering wheel, door panel or centre console. It is only removed with the proper pin code configuration.
Its discreet and sleek design ensures that it will fit seamlessly into your vehicle without additional keys or LEDs It operates on its own, independent of your factory alarm or tracker. It is also a CAN bus immobiliser, which means it is part of your vehicle's control area network and doesn't interfere with other devices, such as your vehicle's built in key fob or alarm.
This unique technology is not detectable by thieves and other systems that employ RF scanning and code grabbing. It simply sends a series of pin codes that are silently transmitted through the buttons on your car's steering wheel or door panels, or central console. The local ghost installer is a revolutionary device that protects your vehicle from keyless entry and smart key theft by producing an individual, unique pin code that must be entered to disarm it.
The number of vehicles that have no keyless entry in circulation is increasing. Thieves are getting more sophisticated and employ devices for cloning which can be bought on the internet or in classifieds under PS15. The cloned key fob could be used to gain access to the vehicle. A standard immobiliser for vehicles only stops the engine from running only if you have the original key fob, this does not offer enough security and it is easy for criminals to alter or block signals to unlock the vehicle.
Valet mode
A standard immobiliser fitted to your vehicle is an electronic chip that transmits a signal when you press the key fob button, the system will then look for the particular code you have sent from the key to start the vehicle. If the signal is not able to be detected the system will shut off the power and prevent the vehicle from starting. This is the basis of all immobilisers for cars that are aftermarket. It's a crucial step to protect your vehicle from being taken away, even if someone has your keys or an accessory that can boost the signal of your key fob.
ghost immobiliser fitting near me immobilisers do more than simply stop this. The system, located on the CAN Bus of your Mercedes has been programmed with an unique PIN code that must be entered to begin the vehicle. The app is then locked your app, and no one is able to access it until they have the exact pin you have.
The system will also stop hacking, cloning, and signal jamming (which can be used by thieves to get around the immobiliser on your vehicle). If a burglar manages to get their hands on the keys to your car or fob, they will not be able to start your car even if it's located nearby. They could only get your car onto the flatbed truck, which is highly unlikely.
Valet mode comes as an option that comes with your ghost immobiliser. When it is activated the glove box as well as trunk of your vehicle will be locked. This means that anyone trying to steal your car won't have anything valuable to take. It also limits the speed of your Tesla so it can't be driven more than 70mph. It will also disable ludicrous modes. It will also hide your home and work addresses as well as lock your driver profiles, and secure your Tesla dashboard so that no one else can access your private information.
If you would like to use your car as valet parking or service, choose the 'Valet/Service' option on your dashboard app. Enter your 4-digit valet code onto the touchscreen. After this is done, the alarm functions will be removed however it will block the ability to start your car without a valid pin entered. This is ideal for those who need to transfer their car to others such as taxi drivers and garage mechanics.
The first-ever aftermarket CAN bus immobiliser
The Autowatch Ghost provides unbeatable security and is the first aftermarket CAN bus immobiliser in the world. It protects your car from key cloning, hacking, and even key theft. It does this through the vehicle's current interface. It doesn't require additional remotes or fobs, but instead integrates into your vehicle's CAN data network. This makes it a "stealth device.
The device is a circuit board buried in the engine control unit (ECU). It functions quietly. Once activated, it will stop your vehicle from starting until a specific PIN is entered. This is the number you receive when you book an install. This number is required to enable valet mode, deactivate the alarm or permit you to leave in the car of a friend (if they have a Ghost installed as well).
It is designed to be invisible from the interior of your car. It does not emit radio signals, and only sounds when it is activated. It can be placed in a variety of different locations, making it almost impossible to detect. It's also low-maintenance, and can be utilized in conjunction with other anti-theft systems like trackers (Brand dependent), to provide the complete solution.
Many people choose to fit an immobiliser ghost due to the fact that they feel standard security is not enough to prevent their joy and pride from being stolen. Physical deterrents, such as wheel clamps and steering wheel locks are excellent alternatives, but they are not considered "theft-proof" by thieves as they can be easily defeated with the proper tools. audi rs3 ghost installer immobilisers is, however, unable to be bypassed by a thief because it is hidden within the vehicle and if activated, it would shut down parts like the starter motor or fuel system.
Ghost immobilisers are installed for just PS450 - a fraction of the price of other products. It also helps stop your vehicle from being taken. If you want to provide an extra layer of protection to your beloved vehicle call us today to make sure we can book it in for you. We accept credit cards and provide a three-month, credit that is interest-free through Klarna.
Modern day thieves can steal vehicles within 1 minute. They use the OBD port of the vehicle to hack into the ECU and then duplicate the key using an unprotected laptop inside the vehicle.
The Autowatch Ghost immobiliser can prevent this by sending pin codes to buttons on your vehicle (steering wheels and central console). It is completely undetectable to anyone inside your car.No key fobs or LED indicators to reveal its location
If you're looking for a solution to stop keyless entry theft or key cloning, then look no further than the ghost immobiliser. This device is designed to guard your vehicle from these kinds of attacks by blocking the engine after a proper pin code has been entered. This is a great way to protect your car. Insurance companies for cars consider it a security feature that could lower the cost of a policy.
The way in which the ghost works is by connecting to your vehicle's CAN data network, once installed by us at Car Theft Solutions it will only start when you press the exact sequence of buttons using your personal override code. This means that any attempt to start the vehicle without entering this code will be greeted with a loud siren, and the engine will not start. The thief will then realize that they are being caught and will likely abandon the vehicle.
One of the major advantages of this system is that it doesn't transmit any signals like trackers, which means that thieves cannot use RF signal receivers to pinpoint the location of your Ghost unit. It also does not emit any IR (infrared) signals like the typical remote key fobs for control or trackers do, making it extremely difficult to deceive or hack.
The Ghost also has valet-mode which can be activated if you are transferring your vehicle over to an individual for parking or service. This will disable the CAN immobiliser for 30mph, and enables you to use the vehicle normally using your key fob or mobile app. The Ghost will function fully when the vehicle is back in its parking spot.
If you would like to know more about the ghost or have us install it in your vehicle, you can contact us at Car Theft Solutions today. We are a passionate family run business with over 10 years of experience in vehicle security including the Ghost immobiliser installation. We are a Thatcham approved installer of Ghost products and have built our reputation on customer satisfaction.
No cloning or hacking
The Autowatch ghost 2 immobiliser review is one of the most advanced immobilisers available on the market. It shields your vehicle from key cloning and hacking making it nearly impossible to take. The only method to steal your car is physically tow it away. Even then, they would not be able to start the engine.
This is due to the fact that unlike other immobilisers which only prevent the car from starting if they don't have your fob, this clever system actually disconnects your engine control unit so that the vehicle is unable to be started. The system transmits a message through buttons on the steering wheel, door panel or centre console. It is only removed with the proper pin code configuration.
Its discreet and sleek design ensures that it will fit seamlessly into your vehicle without additional keys or LEDs It operates on its own, independent of your factory alarm or tracker. It is also a CAN bus immobiliser, which means it is part of your vehicle's control area network and doesn't interfere with other devices, such as your vehicle's built in key fob or alarm.
This unique technology is not detectable by thieves and other systems that employ RF scanning and code grabbing. It simply sends a series of pin codes that are silently transmitted through the buttons on your car's steering wheel or door panels, or central console. The local ghost installer is a revolutionary device that protects your vehicle from keyless entry and smart key theft by producing an individual, unique pin code that must be entered to disarm it.
The number of vehicles that have no keyless entry in circulation is increasing. Thieves are getting more sophisticated and employ devices for cloning which can be bought on the internet or in classifieds under PS15. The cloned key fob could be used to gain access to the vehicle. A standard immobiliser for vehicles only stops the engine from running only if you have the original key fob, this does not offer enough security and it is easy for criminals to alter or block signals to unlock the vehicle.
Valet mode
A standard immobiliser fitted to your vehicle is an electronic chip that transmits a signal when you press the key fob button, the system will then look for the particular code you have sent from the key to start the vehicle. If the signal is not able to be detected the system will shut off the power and prevent the vehicle from starting. This is the basis of all immobilisers for cars that are aftermarket. It's a crucial step to protect your vehicle from being taken away, even if someone has your keys or an accessory that can boost the signal of your key fob.
ghost immobiliser fitting near me immobilisers do more than simply stop this. The system, located on the CAN Bus of your Mercedes has been programmed with an unique PIN code that must be entered to begin the vehicle. The app is then locked your app, and no one is able to access it until they have the exact pin you have.
The system will also stop hacking, cloning, and signal jamming (which can be used by thieves to get around the immobiliser on your vehicle). If a burglar manages to get their hands on the keys to your car or fob, they will not be able to start your car even if it's located nearby. They could only get your car onto the flatbed truck, which is highly unlikely.
Valet mode comes as an option that comes with your ghost immobiliser. When it is activated the glove box as well as trunk of your vehicle will be locked. This means that anyone trying to steal your car won't have anything valuable to take. It also limits the speed of your Tesla so it can't be driven more than 70mph. It will also disable ludicrous modes. It will also hide your home and work addresses as well as lock your driver profiles, and secure your Tesla dashboard so that no one else can access your private information.
If you would like to use your car as valet parking or service, choose the 'Valet/Service' option on your dashboard app. Enter your 4-digit valet code onto the touchscreen. After this is done, the alarm functions will be removed however it will block the ability to start your car without a valid pin entered. This is ideal for those who need to transfer their car to others such as taxi drivers and garage mechanics.
The first-ever aftermarket CAN bus immobiliser
The Autowatch Ghost provides unbeatable security and is the first aftermarket CAN bus immobiliser in the world. It protects your car from key cloning, hacking, and even key theft. It does this through the vehicle's current interface. It doesn't require additional remotes or fobs, but instead integrates into your vehicle's CAN data network. This makes it a "stealth device.
The device is a circuit board buried in the engine control unit (ECU). It functions quietly. Once activated, it will stop your vehicle from starting until a specific PIN is entered. This is the number you receive when you book an install. This number is required to enable valet mode, deactivate the alarm or permit you to leave in the car of a friend (if they have a Ghost installed as well).
It is designed to be invisible from the interior of your car. It does not emit radio signals, and only sounds when it is activated. It can be placed in a variety of different locations, making it almost impossible to detect. It's also low-maintenance, and can be utilized in conjunction with other anti-theft systems like trackers (Brand dependent), to provide the complete solution.
Many people choose to fit an immobiliser ghost due to the fact that they feel standard security is not enough to prevent their joy and pride from being stolen. Physical deterrents, such as wheel clamps and steering wheel locks are excellent alternatives, but they are not considered "theft-proof" by thieves as they can be easily defeated with the proper tools. audi rs3 ghost installer immobilisers is, however, unable to be bypassed by a thief because it is hidden within the vehicle and if activated, it would shut down parts like the starter motor or fuel system.
Ghost immobilisers are installed for just PS450 - a fraction of the price of other products. It also helps stop your vehicle from being taken. If you want to provide an extra layer of protection to your beloved vehicle call us today to make sure we can book it in for you. We accept credit cards and provide a three-month, credit that is interest-free through Klarna.
댓글 달기