Ghost Installation Near Me (Nitka.By) Immobiliser Installation

Secure your prized possessions from thieves by adding a ghost immobiliser. Our TASSA certified system guards vehicles from hacking, key cloning, and vehicle immobiliser bypass.

The system is hidden within the wiring loom of your vehicle, so it is completely inaccessible to anyone who is looking. It works by creating pin code push sequences by using existing buttons on steering wheel, door cards and centre console.

No circuit cuts

It's not surprising that owners want to protect the vehicle they have put so much effort into buying. Traditional security devices, like alarms or wheel locks are easily manipulated by thieves. A ghost immobiliser however is a very effective solution that works silently and cannot be detected by modern thieves.

A ghost immobiliser is also known as a hidden device, is a device that connects to the data network of your vehicle's CAN to shut off the engine. It does this without using key fobs or radio frequencies. It communicates with the ECU of your vehicle through buttons on the steering wheel, dash and door panels. This generates an unique pincode only accessible to you. The code can be altered at any time and can be as long as 20 digits long depending on what you prefer. It also comes with a secure emergency code that you can utilize in case you forget your PIN.

The ghost immobiliser could also be used to block a relay box from transferring the signal of your car's key from inside your home, which would open the doors and begin the vehicle. It can also block sophisticated methods to steal your vehicle, such as OBD port hacking. The device is tiny, weatherproof and difficult to detect. It's also hard to tamper.

Another benefit of the ghost immobiliser is that it can be installed to your vehicle without permanent marks. It is ideal for people who are planning to sell their car in the near future. It's also a lot faster and easier to install than a factory-fitted system.

The autowatch ghost installation Ghost is a groundbreaking next-generation device that prevents vehicles that are stolen through contactless by connecting to the vehicle's CAN data network and using the existing buttons to generate a unique PIN. This is a hidden system that can be put in place without removing wires and does not require any additional key fobs. It also connects to the vehicle's original ECU to prevent thieves from gaining access by using an additional key or replacing the ECU with an "relay". This system is TASSA certified and can be connected to an International Security Register, allowing owners peace of mind knowing their vehicles are protected against theft.

No scanning with RF

You'll want to secure your vehicle from theft when you have spent an enormous amount of money and effort to customize it. Installing an immobiliser is one of the most effective ways to avoid theft. It will stop your vehicle from beginning until you enter an individual code. You can generate a 20-digit code by pressing the buttons on your dashboard or steering wheel. This will ensure that only you are allowed to drive your vehicle. You can also set up a valet and service mode that allows you to temporarily start your car without having to enter the PIN code. This will permit technicians to work on your vehicle without you being present. This is a great option for people who want to save time and simplify their lives.

Ghost immobilisers, which are new generation device, connects to the CAN data network of your vehicle and uses the buttons on the dashboard as well as the steering wheel to set a PIN number. It is designed to blend into, as it does not emit any sound or LED indicators. It can be installed anywhere on your vehicle without impacting the appearance of your vehicle.

This stealthy device is TASSA approved and can cut down on your insurance costs. It has a tracking feature that can locate your vehicle even if it's gone missing. This is especially useful if you own a rare, expensive vehicle which you've invested a lot of effort customizing.

The Autowatch Ghost can be used together with an iPhone application to allow you to start your vehicle remotely in the event that you have forgotten your PIN or are unable to get into the vehicle due to a reason. This feature is great for when you have to collect your kids or run errands, but don't want to put yourself at risk by letting the safety of someone else driving your car. It's also useful in the event that you need to bring your vehicle to a mechanic for maintenance or repair.

The Ghost is unique in that it does not transmit or detect radio frequency, so it is undetectable by thieves who employ RF scanning and code grabbing techniques. It can also protect your car from key copying, ECU swapping and other usual methods of car theft.

No key cloning

Ghost immobilisers are an excellent method to protect expensive cars and stop key copying. They prevent your car from starting until an additional PIN code is entered alongside the normal key fob. This makes it difficult for thieves to steal the vehicle, and can discourage them from trying. This is a particularly good option if you've invested an enormous amount of time and money customizing your vehicle or own a unique or expensive model.

These immobilisers are linked to the vehicle's CAN data network and are completely concealed, meaning that their presence isn't evident. It is also difficult to detect by using radio frequency scanning technology or code grabbing. This means that a thief will have to spend more time to steal your vehicle.

To bypass the system, thieves need to be aware of the unique pin code and the location of the ghost immobiliser fitter. The pin code is specific to you and may be altered as many times as you want. The pin you select is easy to remember but mathematically impossible for anyone else to figure out. The engineer will also provide an emergency pin code in case you forget your pin.

The Ghost CAN bus immobiliser is weatherproof, and can be installed in any part of your vehicle. It can be used with all vehicles and can be completely customized to match your vehicle's style. It is also very affordable and easy to use. The device can be transferred to another vehicle, provided that it is compatible with the new vehicle.

The immobiliser on the CAN bus is compatible with many other security features. For instance, it can detect the damage to your vehicle and notify the owner. It could also shut down the engine if the car is damaged. The system can protect your vehicle from hacking and key duplicate. It can also detect vibrations or contact with the vehicle. Additionally, it will warn the owner if the vehicle has been moved.

No OBD port hacking

Ghost utilizes a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from getting into your vehicle to disable the alarm, disable your key fob, and create new keys. This technology is a major improvement over the methods used by thieves in the past to steal your car. The CAN data network also ensures that the system won't be affected by disconnecting or changing the battery.

The autowatch ghost immobiliser fitting Ghost is the world's first aftermarket CAN bus non-detectable immobiliser that protects against key-cloning, hacking and replica car theft. It does not utilize LED indicators or key fobs. Instead, it relies on the buttons on your steering wheel, console and door panels.

Modern thieves use diagnostics to detect circuit cuts on your vehicle and can bypass immobilisers that require a large amount of wiring or are incorporated into the wiring. The ghost ii immobiliser is weatherproof and doesn't require any additional wiring. It cannot be identified by diagnostic tools that are professional. It can be installed even on vehicles equipped with anti-theft systems.

A Ghost immobiliser comes with a major advantage: your vehicle will only start by someone who knows your PIN code and physically has access to your vehicle. This is a significant advantage over traditional security systems which are easily manipulated with modification of cables or a screwdriver.

If you forget your PIN, you can reset it with the emergency PIN override function on a cell phone or computer. This is a great option in the event that you have to start your car when it's in a garage, or a valet parking service.

The Autowatch Ghost 2 is the most recent version of the product, and is affixed to insurance by TASSA when installed by one of our authorized installers. It comes with the QR fingerprint system to allow parts to be identified, which will enable the return of stolen components in the event that they are discovered, and can also be switched into 'service mode', which will allow the engine to start when your car is in a garage or using valet parking however, you must enter your PIN code to leave the vehicle.