Choosing Upvc Window Replacement Hinges

Choosing and fitting upvc window hinges for replacement isn't as difficult as you may think. Check that the hinges' arrows face in the correct direction, and determine the thickness of the hinge arms on the frame that opens (13mm or17mm).

There are many different kinds of hinges that you can pick from, each one with distinctive features. This article will review the most popular types of uPVC window hinges and their advantages.

Egress/Easy Clean Hinge

They are a great choice to replace or upgrade the fire escape safety window because they are able to open at a 90-degree angle. They can also be lowered to an easy clean position to allow you to easily reach the outside of windows to clean them without the need to climb a ladder or lean over at potentially hazardous angles.

Yale is one of the most reputable and well-known brands in the home security industry. These hinges can be used with any type of uPVC side-hung window. They can be moved to the easy-to-clean position by pressing an unassuming button, and then sliding the window sash to one side. When the sash is closed, it will be reset to its original position.

They are available in both 13mm and 17mm stack heights. Utilize our Egress Selection Guide to help you determine the best product for your awning window hinges.

These hinges are compatible with traditional side-hung frames made from aluminium windows hinges or uPVC. They are fitted with a simple friction screw to alter the amount of resistance that is generated. This allows for easier opening of the window and reduces the possibility of a mishap during strong winds. They have been cycle tested to over 30000 cycles and are in compliance with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinges for upvc windows hinge is simple to use and has no buttons or catches. It is a simple and safe option to emergency exit and cleaning. Firstly, open the window to the egress (full opening) position, and then press the hinge retaining clip on the inside of the bottom corner. This will release both the top and bottom catches allowing you move the sash towards the clean position. Once it is in the easy-clean position, close the window to reset the hinges back to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges commonly referred to as "Easy Clean" hinges are used to replace side opening windows to allow escape (fire safety) reasons. These hinges permit an opening larger in the event of fire. The building regulations state that this type of hinge has to be set in any room that has windows.

The windows have a friction stay that allows them to open to a 90-degree angle. They also let the opening sash slide across the glass when it is opened, allowing for easy cleaning without the need to climb ladders. The hinges aren't flimsy catch or buttons and operate with a simple, safe lever that can be accessed from the inside of the home.

The hinges, which are manufactured in the UK by Cotswold are fitted with a child safety restriction for daily use. This can be overridden using a hidden button. You'll be able to rest of peace of mind knowing that your children won't accidentally open the windows too wide. They are available in 13mm and 17mm stack heights.

To order these hinges simply measure the length of your existing side-hung window hinge that is fixed to the frame (see the guidelines for measuring your upvc window hinges types window hinges). Choose the proper size hinge from the list below.

Please note that this measurement is taken from the hinge's point that attaches to the frame and not the sash. The actual hinge length can be longer or shorter depending on the way your windows were made in the past. When deciding the width of the hinge, most upvc frames will fit a stack height of 13mm however if your original window frame is 17mm, choose this option. Alternately, you can install the 4mm packer to make up the difference. The hinges are available in two different directions (1 left and one right). The hinges do not come with screws. These can be bought separately if required. We recommend using our upvc window hinge repair upvc window hinge screws. These screws are designed to increase the performance of your hinges and allow them work smoothly for longer. They have a reduced-friction design and a more durable weather seal that includes an encapsulated nylon reducer cap.

Restricted Hinge

Standard hinges can make it difficult to open windows completely. These child safety hinges can help overcome this problem and are a great solution when ventilation is needed but access to clean up or escape in the event of fire isn't possible. They limit the possibility of opening the sash, and allow overriding this restriction by pressing a button. They work with both side- and top-hung windows and are available in 13mm and 17mm stack heights.

The Nico Restricted Egress Friction Hinge blends the advantages of a standard restrictor and a fire escape hinge to provide an efficient and easy way to meet building regulations. It is suitable for side-hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is available in two parts with one hinge being the restricted egress, and the other the unrestricted. This lets one hinge be placed at the bottom, while the other hinge is placed at the top.

These uPVC hinges are made to be used with windows that cannot be fully opened, like the bedroom of a child. The mechanism restricts the distance the sash can open to 100mm in a safe distance and then it re-engages after the window is closed.

These upvc window hinges near me friction-type hinges can be used with all types of windows. They are especially useful for windows that are difficult to reach, such as those in three-storey apartments or those that require a ladder. They can be paired with our selection of security enhancements such as hinge guards, protection plates for hinges or dog bolts for PAS 24 performance.

When replacing a hinge on a window, it is important to determine the length of the existing hinge to ensure that you order replacements that match in size. This can be accomplished by looking through the image gallery of the hinge and then deciding where you would like it to be. The top hung hinges can only be positioned on one side, whereas the side-hung hinges can only be placed on one side.

Standard Hinge

A standard hinge is made of metal-to-metal contact, and there are no additional parts to reduce friction. It's available in a variety of finishes, and is fire-rated. To quickly determine the radius of hinges, lay them out flat and align a quarter dime in two corners. If the dime fits better than the quarter, the corner is rounded by 1/4 inch. If the quarter fits better, it's rounded to 5/8 inch.

The hinge you choose can enhance or break the look of your door. Achieving the same style and finish of your hinges to your door will give it an attractive and cohesive design.