How to Unstick a suzuki swift remote key replacement Ignis Key
suzuki car key replacements's funky and affordable city car gets a re-designed midlife refresh. It's not a hot-hatch, but it can handle roads in rural and urban areas with ease. Its tight turning circle makes driving around towns effortless.
The new model comes with smart safety and driver assistance technology with features like lane departure alerts and a drowsiness detection alarm that's a welcome addition on long drives.
Steering Lock
The steering lock is a security measure that protects your Ignis from being taken when it's in gear. It's a great security feature however it can be frustrating when you're in a hurry and you're unable to unlock your steering wheel. There are fortunately, a few easy things you can try to fix the problem.
Make sure that the ignition switch is set to "on". If this is the case, try turning the key in the same direction as you did before the wheel became locked. This could be tricky but typically enough to unlock the wheel.
If the wheel does not unlock, you can spray a tiny amount of canned air into the ignition cylinder to help lubricate it. Make sure you wear eye protection when taking this action to ensure you don't get any air that has been sprayed into your eyes! Liquid graphite could also help to help lubricate the cylinder.
If none of these strategies work, then you'll need to replace the ignition lock assembly. It's an easy component to locate at any auto parts store. Just make sure you purchase the exact replacement and compare it to your old one before you attempt to install it. Also, be sure to remove the cover over the ignition so that you can inspect the assembly.
Worn
The steering lock could bind the ignition switch and cause the key to become stuck. This is a safety feature designed to prevent your Ignis from slipping away when the engine is running. If this happens, turning the steering wheel will unbind it.
In time, the Ignis keys can wear out and become harder to turn. This might not be as common as a damaged ignition switch, but it does occur. If this is the case, you must replace your key.
Check to see if something is preventing your Ignis ignition key from gaining access to the cylinder. There could be dirt or debris which can become stuck inside the ignition cylinder and block it from turning.
Finally, you should try a little grease to see if it can help. There are a range of lubricants at your garage or in a local auto parts store.
A silicon "glow-in-the-dark" key cover is another option. These covers absorb light energy and release it in dark or murky conditions. They also keep your key or fob from wear and tear. They are available for a majority of suzuki ignis key fob not working models, and can be purchased through the internet or from a nearby Suzuki alto Remote Key dealership.
Bent
Over time and through repeated use, a key may be bent. This could cause the teeth on the key to not be able to engage with the lock cylinder in the same manner and prevent the key from turning in the ignition. If this is the case the key will need to be replaced. It is a good plan to duplicate the spare key and store it in a secure place.
Another reason is that the cylinder that controls ignition can wear out. If the lock pins within are stuck or jammed together the cylinder may be unable to allow the key from going through or out of the cylinder. Replacing the cylinder could solve this issue, however it is best to do it before the key gets stuck in the ignition to prevent further damage.
If your Ignis key is still stuck after trying the easiest fixes it's time to lubricate the cylinder. Graphite powder or liquid graphite may aid in moving the lock pins more freely and free your key. This is readily available in most auto parts stores. When applying the lubricant, ensure that your ignition is in park. Do not try to manipulate it to loosen it. This could result in more serious problems.
Broken
If you've tried everything else to remove a lock but it's still not moving the key, your final option is to try some lubricant. You can buy some of this at your local auto parts store and apply it to the inside of the cylinder that controls the ignition with a cotton ball or a rag. Move the key gently to spread the lubricant around and then try again. Try to massage it forward, but be careful not to push too hard, as you could cause damage to the cylinder.
It's also possible that the circuitry inside the key may become inactive over time. This isn't as common however, and you'll need make a duplicate of the key.
The case of your Suzuki keyfob might also become damaged or worn. This is most likely especially if you're using an inexpensive replica key fob with a rubber or plastic shell. The Key Crew may be capable of transferring the internal circuitry from the old keyfob to an alternative case based on the specifics of the situation. This will reduce the cost of buying a new keyfob. We'll let you know if this is an option for your situation when we contact you to arrange the service.
suzuki car key replacements's funky and affordable city car gets a re-designed midlife refresh. It's not a hot-hatch, but it can handle roads in rural and urban areas with ease. Its tight turning circle makes driving around towns effortless.
The new model comes with smart safety and driver assistance technology with features like lane departure alerts and a drowsiness detection alarm that's a welcome addition on long drives.
Steering Lock
The steering lock is a security measure that protects your Ignis from being taken when it's in gear. It's a great security feature however it can be frustrating when you're in a hurry and you're unable to unlock your steering wheel. There are fortunately, a few easy things you can try to fix the problem.
Make sure that the ignition switch is set to "on". If this is the case, try turning the key in the same direction as you did before the wheel became locked. This could be tricky but typically enough to unlock the wheel.If the wheel does not unlock, you can spray a tiny amount of canned air into the ignition cylinder to help lubricate it. Make sure you wear eye protection when taking this action to ensure you don't get any air that has been sprayed into your eyes! Liquid graphite could also help to help lubricate the cylinder.
If none of these strategies work, then you'll need to replace the ignition lock assembly. It's an easy component to locate at any auto parts store. Just make sure you purchase the exact replacement and compare it to your old one before you attempt to install it. Also, be sure to remove the cover over the ignition so that you can inspect the assembly.
Worn
The steering lock could bind the ignition switch and cause the key to become stuck. This is a safety feature designed to prevent your Ignis from slipping away when the engine is running. If this happens, turning the steering wheel will unbind it.
In time, the Ignis keys can wear out and become harder to turn. This might not be as common as a damaged ignition switch, but it does occur. If this is the case, you must replace your key.Check to see if something is preventing your Ignis ignition key from gaining access to the cylinder. There could be dirt or debris which can become stuck inside the ignition cylinder and block it from turning.
Finally, you should try a little grease to see if it can help. There are a range of lubricants at your garage or in a local auto parts store.
A silicon "glow-in-the-dark" key cover is another option. These covers absorb light energy and release it in dark or murky conditions. They also keep your key or fob from wear and tear. They are available for a majority of suzuki ignis key fob not working models, and can be purchased through the internet or from a nearby Suzuki alto Remote Key dealership.
Bent
Over time and through repeated use, a key may be bent. This could cause the teeth on the key to not be able to engage with the lock cylinder in the same manner and prevent the key from turning in the ignition. If this is the case the key will need to be replaced. It is a good plan to duplicate the spare key and store it in a secure place.
Another reason is that the cylinder that controls ignition can wear out. If the lock pins within are stuck or jammed together the cylinder may be unable to allow the key from going through or out of the cylinder. Replacing the cylinder could solve this issue, however it is best to do it before the key gets stuck in the ignition to prevent further damage.
If your Ignis key is still stuck after trying the easiest fixes it's time to lubricate the cylinder. Graphite powder or liquid graphite may aid in moving the lock pins more freely and free your key. This is readily available in most auto parts stores. When applying the lubricant, ensure that your ignition is in park. Do not try to manipulate it to loosen it. This could result in more serious problems.
Broken
If you've tried everything else to remove a lock but it's still not moving the key, your final option is to try some lubricant. You can buy some of this at your local auto parts store and apply it to the inside of the cylinder that controls the ignition with a cotton ball or a rag. Move the key gently to spread the lubricant around and then try again. Try to massage it forward, but be careful not to push too hard, as you could cause damage to the cylinder.
It's also possible that the circuitry inside the key may become inactive over time. This isn't as common however, and you'll need make a duplicate of the key.
The case of your Suzuki keyfob might also become damaged or worn. This is most likely especially if you're using an inexpensive replica key fob with a rubber or plastic shell. The Key Crew may be capable of transferring the internal circuitry from the old keyfob to an alternative case based on the specifics of the situation. This will reduce the cost of buying a new keyfob. We'll let you know if this is an option for your situation when we contact you to arrange the service.
댓글 달기