Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not corrosion or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double glazed window repairs near me-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the glass to ensure that any shards fall on the fabric instead of onto the floor, where they could be trampled on and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will keep water and drafts from entering your home until a professional arrives to repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you may think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, over time, they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows so you can access the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could also be due to the mechanism of the handle wears out. It's a good thing that it's simple to repair the loose upvc window repairs near me window handle yourself. First, you'll need close the window and perform an experiment to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it is important that you take action. The leaks of water from windows do can not only cause degrading of the structure of your home but also hamper your efforts to control the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a fairly simple fix and should be undertaken by any DIY expert. Based on the severity of the issue the caulking used previously may require removal before a new layer is applied. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them, and also that the sill pan is angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double glazed window repairs-glazed window, it is more likely the problem is related to the seal, not the frame. Again this can easily be corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it opens with a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It's very simple to replace a hinge on a window repair but it's much easier if someone helps you to hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a picture through our website and we will be happy to give you suggestions.

It is also essential to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to do this at least once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different things. The hinges can also be disaligned as a result of wear, which can cause an opening where the sash and frame meet. This can be easily repaired by giving them a good clean, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge side of the window, can be misaligned. Again, it may be possible to give them a clean but in some instances it could be necessary to have these replaced.

These seals can wear down or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and decrease draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

Your windows made of upvc will remain a great source of insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it could be cheaper to replace them than to repair them. If you have any problems with your window repairs near me made of upvc, it's best to consult a professional as soon as possible.