Replacing uPVC Window Handles

Switching the handles of windows made of upvc is an easy job. It is important to ensure that the replacement handle fits the spindle cut out in the window mechanism.

If the steps below are followed correctly, any cockspur handle should fit in most windows. The most important thing is the step size of the handle.

What to Do You Look For?

Many of the windows in the UK come with uPVC handles and, over time, they may begin to show signs of wear and wear and tear. If this happens, the window handle can become loose or difficult to operate, making it necessary to replace it. This is a simple task that can be accomplished by anyone who is familiar with basic hand tools.

The first step is to ensure that the handle is securely attached to the frame of the window and in its open position. The next step is to locate the pins or screws that secure the handle. These are typically located on the inside face of the handle. They can be removed with a screwdriver, or pliers.

Once the handle has become loose It is best to gently pull it away from its hinges. It is then time to find a replacement upvc window handles handle that is the same design and size. This can be accomplished online or at a local DIY store, and should take about five minutes with a screwdriver.

When replacing a upvc replacement door handles handle, it is important to think about the step height. This is the distance between the handle's base and where it is located in the window frame. This is a standard measurement and you should confirm the step height before ordering a replacement handle.

There are a variety of sizes based on the type of handle. Inline handles for uPVC windows generally have lug centres of 31mm as well as handles with cockspur with 43mm centres. Tilt and turn handles are typically found on windows made of uPVC and they come with a unique design that allows windows to be slid up for ventilation, and then rotated to open the window fully.

The most frequent uPVC handle cracks are internal, rather than a fracture from the base. This makes them difficult to open and is why it is crucial to ensure that any replacement handle you buy has the same spindle length as your existing one.

Remove the old Handle

Incorrectly fitted or damaged window handles can cause your double-glazed windows to open or close improperly and could even result in them becoming stuck. There are a variety of reasons, such as general wear and tear, or corrosion of the handle. In these instances it is crucial to locate replacement window handles made of upvc immediately to prevent further damage and loss of function.

When replacing upvc windows handles, you should remove the old handles from the window. To do this, begin by getting rid of the screw that is covered when the handle is in the closed position. Once you have removed the screw, you are able to remove the handle. You can make the job easier by using an electronic screwdriver.

It is also worth noting that the screws on the handle may be hidden behind caps made of plastic, so it is recommended to take a Stanley knife to the screw covers and take them off. After removing the old handle, you'll need to check the square cutout on the base to make sure that the new handle you choose for the window lock is compatible. It is important to measure the spindle length on the old handle and compare it to the size of the window mechanism spindle cutout.

There are three kinds of upvc window locking handles handles: Espag handles with a central screw that can be turned right or left and Cranked handles that have two screws and Spade handles that have flat arms and can be used either side of the window made of upvc. It is simple to replace the handle once you've located one that is suitable. Simply screw it into place, and ensure that the spindle is inserted correctly in the lock mechanism. Once this is done the handle should be secured to the window frame and the replacement window handles made of upvc should be secure.

Measure the Spindle

If you're replacing a Upvc window handle that has come off, it's due to the spindle that holds it in place is loose or damaged. In some cases this can be fixed using pins or screws to secure it. In some cases it is necessary to replace the handle. There are several different types of handles made of upvc. They include espagnolette handles inline, cockspur handles, and tilt and turn handles. Each type of handle is installed and replaced in a different way.

It is important to measure the current handle before purchasing a replacement. This will ensure that the handle fits the window properly and be the correct size. All handles are sized in accordance with industry standards, so it is easy to find the correct size.

To determine the size of the handle move the window to the open position. You will then be able see the size of the screw or pin that holds it. Make use of a ruler or tape measure to determine the length the spindle is. Once you know the length of the spindle, you can buy a new spindle that is exactly the same size.

The step height of a window handle is also important to consider when purchasing an alternative. The step height is the distance from the bottom of the handle until where it sits on the frame. It is typically approximately 21mm or 9mm in aluminum and uPVC. To be sure that the new handle will work, you can drop something into the gap to determine the distance it will go before it comes into contact with an obstruction.

Cockspur handles often have different backset heights, based on the type of window they are placed in. Inline espag handle heights are 43mm from centre to center (two fixing points). Cockspur handles however they have different backsets according to the style of the window they are in. This is because they have an extension spur that extends from the handle and is secured over a cockspur wedge striker.

Fit the New Handle

When you've chosen a new handle, carefully align it with the screw holes in the door and fix it using the screws provided. If you're also replacing the latch lever, it can be installed similarly to the main door handle. Then, you can reattach the composite door handles trim in order to conceal the mounting screws and finish the project.

Tips: To remove a metal head from a wooden wedge, place the handle on the floor so that its wide end is on the floor. Then use a hammer and tap the narrow end. Be careful not damage the handle or handle spindle.