Choosing Upvc Window Replacement Hinges

Choosing and fitting upvc window hinges for replacement isn't as difficult as you may think. It is important to check the arrows on the hinges are facing the correct way and the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.

There are many different kinds of hinges, each having their distinctive characteristics. This article will focus on the most commonly used types of uPVC window hinges, and their benefits.

Egress/Easy Clean Hinge

These are a great choice for replacing or upgrading your fire escape replace window hinges because they can open to a full 90 degree angle. They can also be removed to an easy clean position so that you can easily access the outside of your windows to clean them without the need to climb an overhang or climb a ladder at angles that could be dangerous.

Yale is among the most trusted and well-known brands in the field of home security. They are suitable for all kinds of uPVC side-hung windows. By pressing a tiny button, the window sash will be moved to the side and then into the easy-cleaning position. After closing, the sash will automatically reset to its initial position.

They are available in both 13mm and 17mm stack heights. Use our Egress Selection Guide to help you determine the best product for your window.

These hinges can be fitted to standard side-hung frames made of uPVC, or aluminium. The friction screw is used to adjust the resistance. This makes opening the window simpler and less likely of a mistaken closing in strong winds. They have been tested for over 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

The Nico Egress Easy Clean friction hinge is easy to operate and does not have buttons or catch. It is a simple and safe option for emergency exit and cleaning. Firstly, open the window to the egress (full opening) position and then press the hinge retaining clip located on the inside of the bottom corner. This will open the top and bottom catches and allow you to move the sash into an easy-clean position. Once in the easy-clean position, close the window to return the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges, often known as "Easy Clean" hinges are used to replace upvc energy efficient window hinge side opening windows for egress (fire safety) reasons. These types of window hinges open wider and faster than normal hinges, allowing an expansive clear opening to escape in the event of an incident of fire. Building regulations require that this kind of hinge should be placed in any space that is habitable and has a window.

They feature a unique friction stay that allows the window to be opened to an angle of 90 degrees. It also allows the opening sash to slide across when open to allow easy cleaning of the external side of the glass without needing to climb ladders. The hinges aren't flimsy buttons or catches, and are operated with an easy, secure lever that can be accessed from inside the home.

The hinges are made in the UK by Cotswold and come with a child safety restraint for use throughout the day which can be turned off with a hidden button giving you peace of mind that your children won't accidentally open the window too far. They are available in 13mm or 17mm stack heights.

To purchase these hinges, measure the length of your current side-hung window hinge which is fixed to the frame (see the article on measuring your upvc window hinges). Select the correct size hinge from the list below.

It is important to note that the measurement is taken from the part that fixes to the frame not the sash, the actual hinge length may be slightly shorter or larger based on the manufacturing process of your old windows. When deciding on the width of the hinge, most frames made of upvc will have the 13mm stack height however if your previous window hinges repair frame measures 17mm, choose this option. You can also utilize the 4mm packer in order to compensate for the difference. All hinges come in two different directions (1 left and one right). Screws are not included with the hinges. These can be bought separately if required. Our window repair screws made of upvc are recommended. These screws are designed to increase the performance of your hinges and allow them to operate smoothly for longer. They have a reduced friction design, and an improved weather seal with a new nylon reducer end cap.

Restricted Hinge

There are times windows need to fully open and this can be difficult using hinges that are standard. These child safety friction hinges are a fantastic solution to this issue. They can be used in situations where ventilation is needed but escaping or cleaning a fire is not feasible. They limit the possibility of opening the sash and allow for the bypass of this limitation by pressing the button. They can be used for top and side hung windows. They are available in 13mm and 17mm stack heights.

The Nico Restricted Egress friction hinges for upvc windows hinge combines the advantages of a standard restrictor and an escape hinge to provide an efficient and simple method to comply with building regulations. It is available in 13mm or 17mm stack heights and is suitable for the top and side openings of uPVC window. It comes in a pair with one hinge being the one with restricted egress and the other being the unrestricted. This permits one hinge to be placed at the bottom, while the other is set at the top.

These uPVC hinges are restrictive and have been tested to BS6375 Part 2 and are designed to be used on windows that cannot be opened fully such as a small children's bedroom. The mechanism limits how to replace a hinge on a double glazed window far the sash can open to an appropriate height of 100mm and then it re-engages after the window is closed.

These uPVC hinges with friction can be used with any type of windows. They are especially useful for windows that are difficult to reach, such as those in three-storey houses or those that require a ladder. They can be combined with our range of security enhancements such as hinge guard protection plates or dog bolts to provide PAS 24 performance.

When replacing a window hinge it is crucial to determine the length of the existing hinge so you can order replacements that match in size. The easiest method to do this is by viewing the hinge in the image gallery and working out the location you would like it to be positioned. The top-hung hinges can only be placed on one side, whereas the side hung ones can only be placed on one side.

Standard Hinge

Standard hinges use metal-to-metal connections and don't require extra parts to reduce friction. It comes in a variety of finishes and also comes with a fire rating. To determine the radius of your hinge, lay it flat and then line up a dime and quarter in two corners. If the quarter fits better, then the corner should be round to 5/8 inches.

Selecting the right hinge can make or break the appearance of your door. It's important to match the style and finish of your door to its hinges for a cohesive design that is both practical and visually attractive.