Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable item from theft. It's discreet and does not require any additional key fobs.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be modified up to 20 times. This will then authorize the startup of your vehicle.

Simple PIN Code Change Process

With the rising rate of vehicle theft, many owners are seeking to improve their security. There are many types of aftermarket security devices available from tracking systems to alarms and immobilisers. However there are a few that are equally efficient in protecting your vehicle. While a tracking system can assist you in locating your car in the event of theft, it does not stop the crime from happening in the first in the first place. Immobilisers, however perform exactly as they claim on the label - they disable your car's motor so that it can't be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it almost impossible for thieves to take your vehicle.

The ghost device utilizes the buttons on your car to generate an unique sequence that needs to be entered to allow the engine to start. This can be done via the indicator stalk or window buttons. Additionally it is possible to use an app on mobile that can act as an emergency PIN code override, allowing the driver to operate the car without the button sequence. This is especially beneficial if you have to hand your car over for valet parking or maintenance since the immobiliser will still be active and not deactivated.

The Ghost immobiliser problems is an unique and innovative device that operates with the buttons of your vehicle instead of as a standalone device. This means that it is not just a powerful security measure against theft from your vehicle but can also be transferred to any future vehicles you have, making it more valuable than a traditional steering wheel lock.

Small device that is weatherproof

The Autowatch Ghost Immobiliser is a sophisticated security system that protects your pride & joy from key cloning and hacking. It also stops ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices that are a popular technique used by thieves to bypass immobilisers.

The benefit of CAN data over conventional systems is that they work silently. It can't be detected by sophisticated RF scanning or code-grabbing technology and is also unrecognizable by traditional diagnostic tools. The Autowatch bmw x5 ghost installer doesn't emit LED indicators and instead uses the buttons in your vehicle, such as the steering wheel, centre console or door panels to create a unique, customizable disarm sequence. You can even make this sequence up to 20 presses long for added security. The iPhone app only allows one connection, using the Ghost's unique pairing code. the Ghost. All communication between the two devices is encrypted.

The Ghost also stops thieves from stealing an additional key or replacing the ECU to bypass the immobiliser and start the engine. It will only allow the engine to start only if the correct pin code is entered. It is able to be operated temporarily in Valet/Service mode (with the appropriate parameters, like a 30mph speed limit), so you can give your car to an attendant or valet without needing to enter a code.

Every vehicle is tested

The Autowatch ghost immobiliser install is the first aftermarket immobiliser for CAN bus that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts signals to stop your car from operating normally until you enter a specific code. The system can be turned off or on through your smartphone's app without the need for extra wires.

Standard factory immobilisers in vehicles work by having an electronic transponder in the key that transmits a signal to the ECU. The car will begin to start if the correct code is sent. However, if the transponder from another vehicle is used instead, the immobiliser will not recognize it. This makes it possible for the vehicle to be stolen and then started. A South African company that is at the forefront of safety systems technology developed the Ghost immobiliser. It shields you from key cloning or hacking, and even key theft. The only way a thief could steal your vehicle is physically towing it away, and even then they wouldn't be allowed to drive it.

Ghost uses the buttons in your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to create an unique PIN code that is changeable that must be entered before you are able to use your car. This is performed without the need for extra hardware such as keys-fobs, and can be as long as 20 presses long. It is also undetectable by devices for diagnosis and transmits radio frequency signals, which means thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if a system has been installed.

Ghost is more difficult to get rid of than car alarms, which require disarming with the buttons. This makes it an excellent complement to an GPS tracking device which can be used to locate your vehicle after it's stolen.

Emergency PIN code override

You don't have to look very far on social media to find stories or videos of vehicles that have been stolen with the most advanced technology tools. This includes key-cloning and hacking tools that allow the vehicle to start without your original key fobs.

Our Ghost immobiliser fights this and provides you with an additional layer of security to prevent your vehicle from being stolen when it is targeted by thieves. It creates a unique pin code when pushing the buttons on your steering wheel, door panel and on the centre console. This unique PIN must be entered along with your original key fob in order to stop the vehicle from starting. The unique PIN for override can be found on the black card that you will receive following installation. It's easy to remember as there aren't any LEDs.

The device is hidden within the wiring of the vehicle and does not emit radio signals. This means it can't be detected using diagnostic software which can identify the security system you have installed. This makes it an excellent alternative to the tracker.

In contrast to other security systems which rely on a relay in the engine bays, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely through the use of a digital block of commands to both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm, or tracker with these systems, but this has to be specified prior to installing the device. They are also service/valet mode compatible and a good alternative to a tracker when having your car in for repair at the dealership.

Service/Valet mode

In recent years, there has seen an increase in the number of cars being stolen without the owners keys. It is easier than ever to take your joy and pride thanks to the availability of key cloning devices and door lock picks. We have created the Autowatch audi rs6 ghost installer Immobiliser to combat this. It blocks your car from being driven, even if you keys have been cloned.

It directly communicates with your car's ECU (Engine Control Unit) via the CAN data circuit. It's completely quiet since it doesn't utilize radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also stops the user from using the new ECU or key to bypass the system, since only the PIN code allows the engine to be started.

The device is hidden in your vehicle and is accessed by existing buttons on your steering wheel, center console and door panels. Before you can start your car, you need to enter a unique and reversible PIN number that is up to 20 digits.

This is the first aftermarket CAN bus immobiliser to be created that will stop your car from being started or driven away without a PIN code being entered prior to. If you are driving away with the device in motion, an indicator will appear on your dashboard that will flash continuously for approximately 300m. Entering your PIN code will disable the anti-hijack. Your vehicle will continue to operate just as normal. If you don't enter your PIN code at this time the indication will keep flashing & will require a new PIN code for every attempt to start your car.