Patio Door Lock Repairs

Over time, the wear and tear can cause lock malfunctions. There are fortunately, a number of simple and effective steps that can help restore your uPVC patio door lock repair door's security.

These easy fixes will make your home safer no matter if you adjust the lock or clean the mechanism.

Clean the Lock

While patio doors are a great way to bring the outside in and keep the elements out, they can also be an issue for security if your lock isn't working as it should. Over time, wear and tear, cold and hot weather dirt and debris can cause your patio door repairs near me door lock to become difficult to operate. With a little maintenance you can ensure that the locks on your patio door always perform effectively.

To begin with, it's crucial to clean your patio door's lock and all of its moving parts. This helps remove any dirt and coatings that may be preventing the lock from functioning in the way it should. Begin by wiping down all the moving parts of the lock for your patio sliding door repair near me door with a damp cloth. Then you can use a scouring paper or a rough damp cloth to scrub the dirt-infested parts of the frame and door. Then clean the lock with a dry cloth to remove any remaining moisture. Allow it to air-dry before using it.

If your patio door is equipped with pin-tumbler locks you can lubricate it by applying powdered Graphite to the key. You can also apply a Teflon lubricant like WD-40 Multi Use Product. This kind of lubricant is easy to apply and it doesn't dissolve with time. If you're unable to find the right lubricant to use with your lock, you can apply a pencil that has a thicker tip. Insert the pencil in the lock, then shake it to distribute the graphite.

Regular maintenance is also necessary to keep the tracks of sliding patio doors clear from dust, dirt and other debris. These tracks are particularly vulnerable to snow, ice, and other particles, which can cause them get stuck or to bind. This could make it difficult for your Patio door Lock Repair door to be opened and closed.

You can clean the track rails and rollers of sliding patio doors by removing weather stripping that is dirty or damaged. Clean it and replace it. The same applies for patio door rollers, which can be cleaned and then sprayed with a non-stick lubricant that will allow them to move freely.

Lubricate the moving parts

uPVC french doors, which are similar to sliding patio doors, operate using 3 to 4 or sometimes 5-point locking mechanisms which include the handle and lock cylinder controlled by keys. These doors require maintenance, lubrication of the moving parts. This can be done using a thin oil but not WD40. It should be done at least once per year.

If sagging hinges don't cause the issue it could be because the door isn't aligned. It may be rubbing against or catching the strike plate's hole in the frame. Remove the strike plate and use a sharp tool to enlarge the mortise. This allows the latch to sit properly in the hole and avoids getting caught or rubbing against the frame.

Measure the diameter of the cylinder using an object of wood or a book that is able to fit into the space above the adjustment screw. The outer dimension is the distance from the outside of the door to the middle of the cylinder. the inner dimension runs from the center of the adjustment screw until the end of the cylinder.

Check the width of the lock.

If your patio door latch is difficult to turn, even after cleaning and lubricating, there's a possibility that it is out of alignment with the strike plate hole. Make sure that your door is properly balanced and that the hinge screws are secure. In most instances, moving the strike plate upwards or downwards will solve the issue.

Oftentimes, the problem occurs when the lock's strike is too small for the latch to engage. In this instance you'll have to increase the opening using either a hammer or chisel, and then test the latch to make sure that it is able to engage the strike plate without rubbing against or landing on the frame of the door jamb.

Before you purchase a replacement lock, first determine what kind of mortise lock you currently have. You can do this by looking at the faceplate on the lock and determining if it is square or round. Examine each screw hole on the current lock, and note their size. This information will allow you to find the replacement lock that has the exact same width and will fit into the hole you have already.

You'll need to locate the mortise lock and inspect it for any scratches, bends or other damage that requires to be repaired. A damaged or bent latch is more likely to break than one that's not utilized often, so make sure to replace the lock with a brand new one that is secure if you find any signs of damage or wear.

Once you've decided on the kind of lock replacement you need It's time to begin the actual repair. The old spindle and handle should be removed from the doorway to the patio door repair company. Introduce the new handle. Start by putting in the interior handle by aligning it with the spindle and then securing it in place with the two bolts or screws that secure it. Install the exterior handle following the interior handle. After you've completed these steps you can test the new handles to ensure they can be opened and closed easily and that the latch is catching properly with the strike plate.

Check the Door's Strike

The strike plate and the door latch are two parts that work together to lock the door. If these parts aren't aligned correctly and the latch doesn't latch the door shut properly. This is typically simple to repair.

First, inspect the strike plate's receiving holes to ensure that they are clear of obstructions, such as dirt or plastic plugs. Then loosen the keeper screws that keep the strike plate in place and allow it to move vertically, but not separating it from the frame of your door. Then, adjust the strike plate so that its holes for receiving align with the latch hooks on the door latch. After the strike plate is adjusted, tighten all screws and check whether the door shuts smoothly.

Door strike plates can be difficult to access for homeowners with sliding patio doors, but they're crucial to lock and unlock your door. The metal plates are situated at the top and bottom jambs of the door where they support its latch. Then, the door latch is able to slide into the strike plate, creating an airtight seal when closed. If the strike plate is damaged, rusted or not installed correctly, it can hinder the latch from locking the door securely.

The most common reason for a patio door lock to stick or not close is a misalignment between the latch and the strike plate. This can be verified using the "lipstick" test. Rub some lipstick along the edge of the deadbolt. Then cover it with masking tape. The lipstick will leave an impression when you shut the door. This will show you exactly where the latch meets the strike plate. If the mark is too low or high, you can easily alter the strike plate.

If your patio door locks for sliding are not working properly, they can keep your home secure from intruders. You need to fix this problem as soon as possible. Follow these easy steps to repair your patio door lock and restore its functionality.