Double Glazing Seal Repairs

If the seals of double-glazed windows are damaged they can lead to damp and mould. This could cause damage to the frame and walls surrounding it and affect your health.

Fortunately, the majority of uPVC windows can be repaired using resealing, rather than replacement. A glazier can clean the frame and the glass of the window, apply a new bead, and smooth it.

Water Leaks

Window seals are designed for water to stay out of your home. However, when they start to wear down, it can result in water leaks around your windows. A window that is leaking is not only annoying but it can also cause costly damage to the surrounding structure of your home. It is essential to recognize the issue early and get it fixed by an expert before it gets worse.

The cause of windows that leak is usually not in the glass but on the frame or sill. A leak in this region is the most common indication of a failing window seal. It could be due to damage to the window seal due to weather conditions or aging, worn-out caulking or even an obstruction to drainage that results in a build-up of water or ice.

Another common sign of a window seal failing is water appearing in between the panes of your repairing double glazing windows glazed windows. However, this isn't as risky as a leak since the water doesn't travel enough to reach your home. However, it does mean, that the inert gases that are trapped between your panes have leaked out. This will reduce the insulation value of your window.

The final common sign of a failed window seal is condensation that forms between the panes. This could be caused by a failed seal or a damp atmosphere in your home. It could also be a problem with the glass. The condensation might not just be a nuisance, but it could also lead to the growth of mould and mildew in your home that is very difficult and costly to get rid of.

If you are seeing these indications, it's time to conduct an inspection of your double-glazed windows. The repair or replacement of your windows will help protect your home from water leaks, lower costs for energy, and also eliminate draughts. It's a small cost to ensure your family's comfort and safety. Contact Thompson Creek Window to discuss your options for window seal replacement or repair. Our skilled professionals are here to assist you! We serve homeowners throughout the Mid-Atlantic region.

Condensation

A broken double-glazing seal can allow water to enter the space that is insulating. This water could cause fogging or misting to the window panes.

When you notice condensation forming inside your home it's time to call a professional double glazing repair service. The condensation is a sign that the seal created in the factory has been damaged and moisture is getting into the insulated gap.

Condensation can be caused by a variety of reasons, but it is usually the result of faulty gaskets, sealants or insulation within the uPVC frame of the windows. There are a variety of options for repairing double glazing seals however it is essential that the new seals are correctly size to ensure the best seal and a snug fit.

Gaskets are usually composed of polyurethane, which is a substance that can be used to fill in gaps between double-glazed units. These are designed to last for a long time but they are susceptible to deterioration over time due to wear and tear as well as exposure to different temperatures and weather conditions throughout the year.

Over time, the foam can shrink or crack, which creates a gap in the seal which allows moisture to creep into the double-glazed windows. This not only creates condensation, but it could also result in a loss of energy efficiency, meaning that you're losing heat from your home to outside air.

One option for fixing the issue is to have the windows resealed. This isn't a 100% fix as it will only eliminate the condensation that is already present and not address the root issues that cause the double-glazed windows to leak or develop condensate.

Another solution is to replace your windows completely. This should be handled by a professional that offers an insurance-backed guarantee. If the company fails, you are still protected by insurance. It is important to remember that replacement windows must be covered by a warranty of at minimum 10 years.

Misting

As the autumn months approach, it's a good idea to check that your repairing double glazing windows glazing seals are in good condition. The damaged seals on your windows don't just affect the insulation properties of your windows, but can also lead to condensation, mold and damp. To avoid further damage to your double-glazed windows and save money on energy bills it is essential to fix any issues as quickly as you can.

Double-glazed windows are made of two glass panes which are held together by a gas-filled interior space. An outer sealant layer then covers the gap between the uPVC frame and the glass. This is vital to ensure the airtight seal that keeps warm and cool air from your home and helps you save money on your heating bills. The seals may become damaged over time because of the weather, aging, or poor installation. After this, the magic insulation formula that makes your double-glazed windows so efficient can begin to lose its effectiveness.

If the seals are damaged or defective and are not repaired they could cause condensation and dampness which can affect your health as well as the appearance of your window. The presence of mould and damp not only causes damage to your walls, floors and ceilings but can also cause allergens and irritants in your home that can cause harm to you and your family's health.

The most frequent issue that double glazing suffers from is misting that occurs between the panes. This occurs when moisture gets inside the insulated section of your windows. It can be difficult to fix without professional double glazing repair.

There are DIY ways to deal with this issue, however, we'd recommend against this because it's not just risky but also very messy and damage your windows. These methods involve drilling into your glass unit and then using chemicals to get rid of fog and condensation. This could lead to a variety of problems, such as exposing your windows and units to water damage.

Professional glaziers have the skills, tools and experience needed to properly seal your uPVC frames and give you lasting results. Not to mention they can also give guidance on the best methods to keep your windows in good condition to avoid future issues.

Draughts

A window that is draughty is an indication that the sealant has failed and must be replaced or repaired. This will stop cold air from entering your home. It will also increase efficiency in energy use, decrease heating bills, and increase the comfort of your home.

It is important to know that some draughts aren't caused by window seals but rather from the gap between the frame of the bricks. In some cases it may be possible to repair this by caulking the gap. However, if this is not successful it will require resealing professionally.

If the sealant around a double-glazed window starts to break down, it allows for water infiltration and can lead to dampness or even mold in a few instances. This could cause a negative impact on health and can be very detrimental to the property. If you notice any problems with water ingress, you should deal with them promptly. If your windows are covered by a warranty It is worth checking to find out if the company that sold them will pay for the cost.

It is worth checking if the windows are covered by warranties. Certain companies offer lifetime guarantees but others only provide 10 years. If your double glazing window repair glazing is under warranty, it's worth contacting the company you purchased them from as soon as you can and providing them with details of any issues you're experiencing. It is recommended to contact the company in person or by letter and email. This will ensure that everything is clearly documented and easily understood.

Also, it is important to note that draughts are usually caused by defective hinges, and not due to a lack effective seals. The hinges are responsible for closing the window sash (the section that you open) but they can become stiff over time if they are not regularly oiled. This could cause a gap to form between the sash frame and the sash, which lets cold air into the house. This problem can be solved by replacing the hinges without affecting window seals.