Cat flaps let your cat go inside and out at their own pace, without needing to let them in or out. They also can help stop your cat from urinating in the house.

Installing a cat flap into the door panel made of upvc is much simpler than installing one in a glass door, however it does require some skills and the appropriate tools.

Measure the Door

Fitting a cat flap fitters flap in a door can be tricky however, as long as you select the right kind of cat flap, take your time and follow the steps provided it shouldn't be too difficult. We will show you how to draw the shape using a jigsaw in order to cut the door's area. Then, we'll finish the job by attaching the cat flap. This will ensure that the flap remains in place and also protects the doors from the damage caused by rain and wind.

The first step is determine the width of your pet to get a precise measurement of what size of cat flap you will need. This will enable you to choose a cat flap that is big enough for your pet to walk into the house and leave without needing to open the door every time.

If your kit has an illustration of the location to drill then you can place it on the door, and then draw around it. If your door has sill or moulding on the bottom edge of it ensure that you have clearance from these because this will keep your cat safe and prevent them gaining access to your home.

Put on your eye protection and dust mask and using a jigsaw, begin to cut along the line that you penciled in, but don't press the blade too hard, as this could cause it to cut more quickly than you'd like it to. Utilize a set square to ensure you are cutting the material in a proper manner and that the cut is a rectangle shape. When you are happy with the result, you can take the door material off.

Draw a Line

The cat flap lets you to let your pet go inside and out without worrying about unwanted visitors or unwelcome gifts. It also prevents draughts, and keeps your home's temperature steady. Installing a cat flap on your door can be a daunting task to those who haven't done it before. Many people call a professional joiner or carpenter to do the work. This is a viable option, however you can do it yourself, provided the tools are appropriate and the steps are followed.

This is much easier to do with doors made of wood, however it is still possible with uPVC. However, you must be careful not to damage the doors because this will make it impossible to claim your warranty. First, you must measure the door to ensure it will accommodate the new cat-flap. This should be simple enough if you are using the standard uPVC door, but you may require more care if you have an alternative type of door as these can be more difficult to cut into than solid uPVC panels.

The next step is to measure the height of your cat's belly. This is the distance between the floor and the underside of your cat's stomach. You will need to find an area on the door that will allow your pet to comfortably pass through. Once you have the information, you'll need to mark the area with a spirit-level and a pencil, so that you know the hole will be suitable for your cat.

Once you've marked the area, it is time to cut the hole. You will need to use the jigsaw, and it is crucial to take your time to ensure that the cuts are smooth and straight instead of rough and uneven, as it could cause damage to your door. Wear safety glasses and a dust mask when working with the Jigsaw. Inhaling sawdust is hazardous for your health. After you've finished the cutting, you will have to smooth the edges of the hole using sandpaper, so that your cat flap will fit easily into place.

Cut a hole

It can be difficult to fit an animal flap on the door panel or double glazing unit. You may be tempted to tackle the task yourself, but unless you have experience in DIY it is recommended to hire a professional in to do the task for you. A shoddy job might not just be ugly, but also an enigma for security as well as allowing cold air to get in when the cat is outside and hot air to escape once inside.

The first thing you have to do is mark out the position of the hole in the door with an eraser and a spirit level, this will ensure that it is properly located and is flush with all the other components of the door. Make sure you have sandpaper on hand to smooth any rough edges.

After the line is traced, you must cut the hole with a jigsaw, remember to wear any safety gear for working with an electric tool. If you are concerned about the sound produced by a jigsaw you can buy one that is cordless, which is quieter and more user-friendly to use.

You should only remove the material required to fit the cat flap. A small amount of material will be needed to cover the thickness of the the cat flap itself but removing more than that can cause problems and even cause damage to the door frame.

A upvc door may have a metal frame or panel within it that could interfere with the microchip cat flap cover for winter flap, and in this case you'll need to cut an over-sized hole to ensure that the metal doesn't touch the the cat flap. If this is the case, it is essential to fill in the oversize gap and seal it with water.

If you're looking to install a cat flap in windows made of double-glazed or upvc with metal frames it is necessary to speak with a specialist. They can offer you a brand new piece of glass with the hole already pre-made for the cat flap. This will be less expensive than trying to install a cat flap in an existing pane that wasn't designed specifically for this purpose.

Fit the Flap

Cat flaps let your pet leave and come whenever they want, allowing them the ability to unwind inside the house whenever they feel like it. However, if you own a uPVC door it can be difficult to put in a cat flap, particularly in the absence of a glass pane that can be cut to accommodate one. If you are willing to install a half-glazed uPVC replacement panel, it's possible to install an additional cat flap. It's not as simple as simply cutting a hole in the door though and there are a few things you'll need to take care of first to ensure it's secure.

A composite, uPVC, or GRP door panel is generally made up of a plastic skin that is bonded to an insulating polystyrene base. The material is extremely fragile and care must be taken when cutting into it to avoid causing damage. This kind of door typically comes with a template drawing which you can use as a guide for cutting the hole in the door.

After you have carved out the opening in your front door, it's time to install the cat flap. You can buy and fit a wide variety of different models, from basic button operated ones to microchip activated units that only let in your pet. However, regardless of what kind of cat flap you choose it's important to make sure that your cat can comfortably use the flap without getting trapped outside in bad weather.

A circular fitting cat flap in upvc door panel cat flap door panel (telegra.Ph) is superior than a square one, as circles can be cut more securely into the glass. It's because square holes are more likely to crack the glass when they are drilled. It's also a much safer choice to use since you're not at risk of having to drill into toughened glass that may break and hurt your pet or family members. This is especially important if you have a young or elderly person at home who could be hurt by shards of glass.