ghost install Immobiliser 2

Guards your vehicle against key cloning and stops thieves from driving it using your original keys. Our most recent immobiliser is connected to the CAN data network in your vehicle and a unique PIN must be entered to start the engine.

Ghost, unlike trackers, doesn't emit radio frequency signals and can't be detected by diagnostic tools. There are also no LED indicators or buttons giving away its presence within your van or car.

Anti-key Cloning

The ghost immobiliser is designed to combat key cloning and hacking. This device connects to the CAN data network in your vehicle and generates a unique pin code sequence that is activated by pressing the buttons from the factory on your dashboard and the steering wheel. This stops the thief from being able to start your vehicle. If the incorrect PIN is entered it will stop your engine from running, making it impossible to leave with your joy and pride.

A ghost immobiliser and tracker immobiliser uses new technology that is extremely difficult for thieves to defeat. Unlike physical deterrents like wheel locks and steering locks that can be cut or jacked the ghost immobiliser is a discrete electronic device that can't be easily detected by regular thieves because it doesn't emit radio signals and operates in a silent manner.

The next generation of immobilisers are equipped to shield your car from a variety of threats like keys that are duplicated, key-hacking, and relay attacks. It is also able to prevent thieves from adding a new key or replacing your ECU in the sense that it will not allow the car to start without entering the correct PIN code first.

Unlike other immobilisers, the ghost immobiliser 2 (https://Ai-db.science/) does NOT require any additional remote or key fobs to operate. It can be turned off by using an app that is installed on the smartphone of the driver. This is a great option when you have to hand your car away for valet parking, or maintenance without keys.

The Autowatch Ghost-II represents the latest version of the Ghost immobiliser. It was designed to be easy and convenient to use and yet be as secure as it can be. This is accomplished by connecting the Ghost-II into the vehicle's data network CAN, meaning that there are no wires to hide or easily identified. It also comes with an integrated feature that allows you to disarm your Ghost-II by connecting to the vehicle's Bluetooth and you'll be able to enter and drive with no hassle.

OBD port hacking

OBD port hacking has become the latest method used by professional car thieves. Thieves can gain access to your vehicle's OBD by using a laptop, a mobile application, and cables that can be purchased on the internet for less than PS50. Once they have access, they will be able to do anything they want, from resetting your vehicle's fault codes, tuning your car, or even taking it away in less than a minute.

It can prevent your car from being stolen by requiring a unique PIN sequence to be entered in conjunction with your key fob prior to you start the engine or leave. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. It is not detected by any scanners for RF or code grabbing. It even comes with a Service/Valet option that will allow your vehicle to start without the need for a PIN.

To utilize an OBD hacking device you must have a laptop with software capable of reading the OBD protocol, which can be purchased for under PS100 on ebay or Amazon. You will also need cables with OBD pins which are connected to the CAN bus. These can be purchased on Amazon or Ebay for around PS50. The cable must be connected to the wiring harness of your car, such as the radio wiring harness.

Once the hacker has a connection to your vehicles OBD port, they will send diagnostics requests to the system at a high baud rate that can crash the CAN, and prevent systems within your car from working. This can cause the engine to stall, doors to lock and even the brakes to activate.

No remotes or keys are required.

A car immobiliser is a fantastic piece of anti-theft technology that is used by billions of modern cars around the world. Utilizing engine ECU software to prevent cars from beginning if a false transponder signal is transmitted to it an aftermarket immobiliser can be an excellent method of protecting your vehicle.

It is possible for thieves, if they know the code to deactivate an immobiliser, and bypass it. A thief could easily remove the battery from most key fobs by prying them open. They could then employ an easy tool to remove the internal circuit board of an immobiliser and replace it with a blank. Then they will be able to start your car.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser communicates with the engine ECU (Engine Control Unit) via a discrete and silent CAN data circuit that is not detectable by diagnostic tools, such as the ones employed by high-tech thieves. It also doesn't make use of a traditional key-fob that has LED indicators, meaning it is able to go unnoticed at a glance.

You may have to turn off Autowatch's Ghost 2 protection at certain times like during valet parking or a service. The ghost 2 immobiliser review CAN immobiliser comes with a specific mode for this, referred to as 'Service Mode that is activated by a push of an app on your phone. The car is still operational however the maximum speed is limited to 36mph.

Contact us today to set up a demonstration at our workshop. A member of our team will run through the entire process of the system's operation and provide you with owner's manuals, installation certificate, Ghost 2 emergency card and security assurance.

Simple Change of PIN Code

Ghost is the latest generation of device that protects your car without cutting wires, or installing key fobs from an aftermarket. It connects directly to your vehicle's CAN data network and a unique PIN code is programmed into it via buttons on your steering wheel and dash. The device doesn't emit RF signals, so it is not able to be tampered with. This makes it difficult to detect by sophisticated RF scanning and code grabbing techniques employed by modern thieves.

The PIN code can be altered to lock out previous drivers, or even add an override code if you forget the sequence. The installer will show you the procedure to accomplish this during installation. The system also includes the valet mode feature that can be used to temporarily disable the pin input sequence so that your garage or mechanic can fix the vehicle without needing to know the pin code. This is a great choice for those who do not want their pin number to be disclosed, but would like to leave their vehicle with valet parking or service.

Ghost is a discrete system that uses the buttons on your vehicle to create an individual and interchangeable PIN sequence. This sequence is entered through the app for smartphones, meaning there are no additional LEDs thrown and your car is safe from the risk of being disabled by hackers or any other technology.

Tested for every vehicle

In contrast to key fobs that require you to press buttons, a ghost immobiliser is hidden under your steering wheel or dash so that you don't even know it's even there. The device is connected to the CAN network in your vehicle and a PIN number can be programmed using the buttons on your car. The system stops your engine from starting unless this code has been entered first. This means that thieves are unable to duplicate the keys on your car or gain access to the OBD port to gain access to your vehicle.

Ghost can be utilized in all vehicles, including electric cars motorhomes, vans, motorhomes and bikes. It is also extremely versatile and can be set to deactivate in a variety of situations. It can be programmed to enter Valet mode, for example when the vehicle is taken to a valet service or parking company. This allows you to drive within a 30mph speed limit, and the ghost immobiliser will start to activate itself when your vehicle returns to your home.

Another fantastic feature is that the device can be reset to your personal PIN at any time. This is beneficial when you forget the code or the device becomes inoperable and is just as good as new.

The device is also completely inaccessible to anyone who doesn't know about it is. It does this by analyzing the buttons on your steering wheel and dashboard, and using the data they send in order to identify the button that was pressed. This makes it a safe and solid security system that is not able to be tampered through RF scanning or jamming, or even a door lock pick set.